|
Product Details:
|
| Capacity: | 48V 200Ah | Rated Capacity: | 200Ah |
|---|---|---|---|
| Voltage Range: | 40V-58.4V | Energy: | 10240Wh |
| Type: | Powerwall Battery | Cycle: | ≥4000 Times |
| Self-discharge Rate: | 3% | Retention Rate: | ≥80%（2000 Cycles） |
| Application: | Household/Community ESS/UPS | IP Standard: | IP67 |
| Highlight: | 10kwh Lithium Phosphate Battery,48V 200Ah Lithium Phosphate Battery,ESS Lithium Ion Battery |
||
48V 200Ah 10kwh Lithium Phosphate Battery ESS Household Community
10kWh Power Bank 51.2V 100Ah LiFePO4 Li-ion Battery with Built-in BMS
Features of 51.2V 100Ah 10kwh Powerwall Battery
♦ Longer Cycle Life
Offers up to 20 times longer cycle life and five times longer float/calendar life than lead acid battery , helping to minimize replacement cost and reduce total cost of ownership
♦ Lighter Weight
About 40% of the weight of a comparable lead acid battery . A " drop in" replacement for lead acid batteries
♦ Higher Power
Delivers twice power of lead acid battery ,even high discharge rate, while maintaining high energy capacity
♦ Wider Temperature Range
-20ºC~60ºC
♦ Superior Safety
Lithium Iron Phosphate chemistry eleminates the risk of explosion or combustion due to high impact overcharging or short circuit situation
Parameters of 48V 400Ah LiFePO4 Battery
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Battery Appearance
51.2V 200Ah 10kWh Powerwall System Application Introduction
Under the condition of good illumination in the daytime, the DC power from PV panel is changed into AC through inverter to supply power for household load. If the household load cannot run out of photovoltaic power, the remaining power will be stored in the battery. If the battery is full, photovoltaic power will be supplied to the grid. In the night or rainy days, photovoltaic cannot generate electricity. The battery supplies power to the home load through an inverter. If the battery is low, the household load will take power from the grid.
1. PV Self-use Surplus Power to Grid
Under the condition of good illumination in the daytime, the DC power from PV panel is changed into AC through inverter to supply power for household load. If the household load cannot run out of photovoltaic power, the remaining power will be stored in the battery. If the battery is full, photovoltaic power will be supplied to the grid. In the night or rainy days, photovoltaic cannot generate electricity. The battery supplies power to the home load through an inverter. If the battery is low, the household load will take power from the grid.
2. Peak Shaving and Valley Filling
In some countries and regions where peak valley time of use price is implemented, if the difference between peak price and low price is large, the application mode of peak shaving and valley filling can be adopted in energy storage system. In the low electricity price period, the energy storage system is charged; in the peak period of electricity price, the energy storage system supplies power to the household load. It can avoid users using too much power grid when the electricity price is high, and save energy expenditure.
3. Standby Power Supply
In some extreme weather (such as tornadoes, typhoons, hail), or substation operation failure, power supply will be interrupted. If the energy storage system is installed, the user can still enjoy sufficient power guarantee in this case.
Battery Testing
1. Waterproof test on lithium battery
Elite LiFePO4 batteries are widely used in marine, like the Yachts, Fishing Boats, Sailing boats, Kayak, Catamaran, etc.
Elite including special processing on lithium battery production crafts to meet the requirements of IP standard in different installation and operating environments. If you want a waterproof lithium battery, we are very pleased to provide you, please let us know your requirements.
2. Analog Car Vibration Test of Lithium Battery
To ensure the safety of our lithium batteries, we not only had many electric tests but also had a series of environmental tests, including the Analog Car Vibration Test.
Test Result: Elite LiFePO4 is suited to all the above road conditions, not only with stable performance but also safe and secure.
3. Nail Penetration Test
The Elite LiFePO4 battery pack is penetrated by two nails, after 6 minutes, there is no fire, no explosion during the whole testing process.
The stable chemistry of the lifepo4 lithium-ion battery proofs to be outstanding safe for use even in an extremely tough operating environment.
4. Drop Test
Elite 24V 200Ah LiFePO4 lithium-ion battery pack weight is 53kgs. it is dropped from 50 meters height at 120km/h speed. No fire, no explosion.
Why Choose US:
1. We offer one-stop power solutions, which saves design time and cost for customer:
-- Pack design / External Case design / BMS design
2. Strict quality control system which enhances customers' competitiveness:
-- 100% PCM test by IQC
-- 100% Capacity test by OQC
3. Delivery on time & excellent service:
-- Fast Delivery in 10 days if stock
-- 8h response & 48h solution
4. Experienced R&D team, be customer's professional power solution consultant:
-- Comprehensive Battery Test Center (Safety and Reliable test)
-- Powerful ODM Ability to Afford Customized Design Requirement
Contact Person: Colin
Tel: +86-755-84862035
